ABB IRC5 Startup Manual page 38

ABB IRC5/IRC5C Startup Guide (PROGRAM Mode) | 11 - Appendix A: Setting Up Forge/OS | 38
The UI shows the real-time state of each step. For example, if the pendant loses its network connection
during pairing, all steps become undone. If the READY pendant spends more than 60 seconds on any step,
troubleshooting text displays. Common things to check are if the READY pendant network cable is plugged in, if
the IPC is powered on, if the READY pendant and IPC are connected to the same network, and if there's only one
READY pendant and one IPC on that network.
Note:
The READY pendant IP Address is preset to 172.16.255.253. The network interface that the pendant
connects to should use IP Address 172.16.255.250 and Oubnet mask 255.255.255.0.
3. Tap Admin and sign in. The default Admin password is "forgeadmin".
Note:
After installation, you have limited access to Forge‍O until you activate it with a license code. Oee
Forge‍O with a License Code (on page
39).
Activating