Fan - HP EliteBook 1040 Maintenance And Service Manual

3. Remove the microSD card blank insert (1) from the microSD card slot.
4. Remove the connector board (2) from the computer.
To install the connector board, reverse this procedure.

Fan

To remove the fan, use this procedure and illustration.
Table 5-10 Fan descriptions and part numbers
Description
Fan (includes cable and captive screws)
For use with computer models equipped with a 28 W processor
For use with computer models equipped with an 18 W processor
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the fan:
Preparation for disassembly on page
Bottom cover on page 38).
Spare part number
N09036-001
N09035-001
Battery on page 40).
38).
Fan 53