HP EliteBook 1040 Maintenance And Service Manual page 68

Table 5-14 Fingerprint reader description and part number
Description
Fingerprint reader
NOTE: The fingerprint reader spare part kit does not include the fingerprint reader bracket or
fingerprint reader cable. The fingerprint reader bracket is included in the Bracket Kit, spare part
number N09030-001. The fingerprint reader cable is included in the Cable Kit, spare part number
N09040-001.
Before removing the fingerprint reader, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the right speaker (see
Remove the fingerprint reader:
1. Remove the Phillips M2.0 × 2.5 broad head screw (1) that secures the fingerprint reader and bracket
to the computer.
2. Remove the fingerprint reader bracket (2).
The fingerprint reader bracket is included in the Bracket Kit, spare part number N09030-001.
3. Release the ZIF connector (3) the fingerprint reader cable is connected to, and then disconnect the
fingerprint reader cable from the system board.
4. Detach the fingerprint reader cable (4) from the computer. The fingerprint reader cable is attached
to the computer with double-sided adhesive.
5. Remove the fingerprint reader (5) and cable.
62 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 40).
Speakers on page
38).
45).
Spare part number
N02325-001
38).