Hot Line - D-Link DVG-6004S User Manual

DVG-6004S User's Manual

3-2-6 Hot Line

General Settings → Hot Line
Enable: Tick the check box to enable a line. If some lines are not used, disable them (Pause Function) to
avoid unnecessary waiting when an incoming call is diverting to the line.
Hot Line: Check to direct the call automatically to a pre-configured destination without any action when the
FXO is off-hook. (ie. as the user picks up the phone). When the FXO is under Hot Line mode, no other
phone numbers can be dialed.
Hot Line No.: Enter the number for pre-defined destination.
Warm Line: Enter the time for the call to start with a pause, so the user can dial another number. The call
will be automatically directed to the pre-configured destination within timeout period.
Dial-out Prefix: It is the number dialed for prefix automatically by FXO when the DVG transit-out calls from
VoIP to FXO.
FXO Line Default Dial-Out: The number FXO will dial out when it receive an incoming call from VoIP.
34
VoIP Gateway Configuration