Line Status; User Setting; Network Setting - D-Link DVG-2004S Quick User Manual

File Transmission mode.
Mode
Click [Update] to begin the firmware update process.

4.2.3 Line Status

Select Line Status from the Management menu.
This window displays the Port and Loop Line Type (IDLE, NG and etc.)
Click Refresh Status to retrieve the terminal adapter status.

4.3 User Setting

4.3.1 Network Setting

Select Network setting from the Management menu.
There are 3 ways to setup the IP address: DHCP, PPPoE, and Static IP. Please select one of the
following depending on your network setup. For example, if you use ADSL, please select PPPoE. For
cable internet users, select DHCP. If your ISP provide you with all the WAN addresses, select static IP
and enter the IP address provided.
DHCP (Dynamic Host Configuration Protocol)
When you select DHCP, IP address is obtained automatically from the DHCP server. The terminal
adapter will not work properly if there is no DHCP server in your LAN.
13