Service Work On The Chassis 13; Raising The Motorcycle With The Rear Lifting Gear; Removing The Rear Of The Motorcycle From The Lifting Gear; Lifting The Motorcycle With The Front Lifting Gear - KTM 890 DUKE R Owner's Manual

13.1

Raising the motorcycle with the rear lifting gear

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
13.2

Removing the rear of the motorcycle from the lifting gear

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
13.3

Lifting the motorcycle with the front lifting gear

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
–
Mount the supports of the lifting gear.
–
Insert the adapter in the rear lifting gear.
Retaining adapter (63529955000)
Rear wheel work stand (69329955000)
–
Stand the motorcycle upright, align the lifting gear to the
swingarm and the adapters, and raise the motorcycle.
402346-01
–
Secure the motorcycle against falling over.
–
Remove the rear lifting gear and lean the vehicle on side
1
stand .
–
Remove the retaining adapter from the link fork.
402029-10
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
Main work
–
Remove screw
F02736-10

SERVICE WORK ON THE CHASSIS 13

1
.
p. 69)
69