Service Work On The Chassis 13; Raising The Motorcycle With The Rear Lifting Gear; Removing The Rear Of The Motorcycle From The Lifting Gear; Lifting The Motorcycle With The Front Lifting Gear - KTM 790 DUKE 2021 Owner's Manual

13.1

Raising the motorcycle with the rear lifting gear

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
13.2

Removing the rear of the motorcycle from the lifting gear

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
13.3

Lifting the motorcycle with the front lifting gear

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
–
Mount the supports of the lifting gear.
–
Insert the adapter in the rear lifting gear.
Retaining adapter (63529955000)
Rear wheel work stand (69329955000)
–
Stand the motorcycle upright, align the lifting gear to the
swingarm and the adapters, and raise the motorcycle.
402346-01
–
Secure the motorcycle against falling over.
–
Remove the rear lifting gear and lean the vehicle on side
1
stand .
–
Remove the retaining adapter from the link fork.
402029-10
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
Main work
–
Move the handlebar to the straight-ahead position. Align the
lifting gear at the front with the adapters to the fork legs.
Front wheel work stand, small (61129965100)
Info
Always raise the motorcycle at the rear first.
–
Lift the motorcycle at the front.
402344-01

SERVICE WORK ON THE CHASSIS 13

p. 61)
61