Table of Contents
Advertisement
• Restart the modem and the router.
1 ) Power off your modem and the router, and leave them off for 1 minute.
2 ) Power on your modem first, and wait about 2 minutes.
3 ) Power on the router, and wait another 1 or 2 minutes and check the internet
access.
• Reset the router to its factory default settings and reconfigure the router.
• Upgrade the firmware of the router.
• Check the TCP/IP settings on the particular device if all other devices can get internet
from the router.
If the IP address is 0.0.0.0, please try the following:
• Make sure the physical connection between the router and the modem is established.
• Clone the MAC address of your computer.
1 ) Visit http://tplinkwifi.net, and log in with the password you set for the router.
2 ) Go to
Network
3 ) Choose an option as needed (enter the MAC address if
Address
is selected) and click Save.
>
Internet
and focus on the
MAC Clone
section.
Use Custom MAC
75
Advertisement
Table of Contents
