Table of Contents
Advertisement
2 ) Exit the wireless configuration tool (the TP-Link Utility, for example).
3 ) Select and right click
Computer Management window.
4 ) Go to
Services and Applications
Configuration
5 ) Right click
Wireless Zero
6 ) Change
Startup type
is Started. And then click OK.
If you can find other wireless network except your own, please follow the steps below:
• Check the WAN LED indicator on your wireless router.
• Make sure your computer/device is still in the range of your router/modem. Move
closer if it is currently too far away.
If you can find your wireless network but fail to connect, please follow the steps below:
• Authenticating problem/password mismatch:
1 ) Sometimes you will be asked to type in a PIN when you connect to the wireless
network for the first time. This PIN is different from the Wireless Password/
Network Security Key. Usually you can only find it on the label of your router.
2 ) If you cannot find the PIN or entering the PIN still does not work, you may
choose
Connecting using a security key
Password/Network Security
3 ) If it continues to show the note
to confirm the wireless password of your wireless router.
Note: Wireless Password/Network Security Key is case sensitive.
• Windows unable to connect to XXXX / Can not join this network / Taking longer than
usual to connect to this network:
•
Check the wireless signal strength of your network. It is weak (1~3 bars), please
move the router closer and try again.
My Computer
> Services, and find and locate
in the Services list on the right side.
Configuration, and then select Properties.
to Automatic, click
Key.
Network Security Key
on Desktop, and select
Start
and make sure the Service status
instead, and then type in the
Mismatch, it is suggested
Manage
to open
Wireless Zero
Wireless
78
Advertisement
Table of Contents
