Honda CB500XA 2017 Owner's Manual page 97

When removing and installing the wheel, be
careful not to damage the wheel speed
sensor and pulser ring.
# Front Wheel
Removal
Place your motorcycle on a firm, level
1.
surface.
Cover the right side of the front wheel
2.
and brake caliper with protective tape or
cloth.
On the right side, remove the mounting
3.
bolts and brake caliper.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc or pad surfaces.
Do not pull the brake lever while the
u
brake caliper is removed.
Tyre Puncture
Take care to prevent the brake caliper
u
from scratching the wheel during
removal.
Tape or cloth
Brake caliper
Wheel speed sensor
Right side collar
Removing Wheels
u
Mounting bolts
Pulser ring
Continued 93