Removing & Installing Body Components; Battery - Honda CB500XA 2017 Owner's Manual

Removing & Installing Body Components

Battery

Rubber
strap
Battery
58
Positive
terminal
Negative
terminal
#
Removal
Make sure the ignition switch is in the
position.
Remove the seat. P. 60
1.
2
Unhook the rubber strap from rear side.
2.
Disconnect the negative - terminal from the
3.
battery.
Disconnect the positive + terminal from the
4.
battery.
Remove the battery taking care not to drop the
5.
terminal nuts.
#
Installation
Install the parts in the reverse order of removal.
Always connect the positive + terminal first. Make
sure that bolts and nuts are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
2
(Off)
P. 24
2
P. 47
2
P. 99