Tyre Puncture
Removing Wheels
u
Make sure that the slot on the brake
2.
caliper bracket is positioned in the lug on
the swingarm.
Brake caliper bracket
Swingarm
98
Slot
Lug
Adjust the drive chain slack.
3.
Tighten the rear axle nut.
4.
Torque: 88 N·m (9.0 kgf·m, 65 lbf·ft)
Tighten the adjusting nuts lightly, then
5.
hold the adjusting nuts and tighten the
lock nuts.
Torque: 21 N·m (2.1 kgf·m, 15 lbf·ft)
After installing the wheel, apply the brake
6.
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
P. 73
2