Honda CB500XA 2017 Owner's Manual page 101

Remove the rear axle shaft, washer, brake
6.
caliper bracket, rear wheel and side
collars.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc or pad surfaces.
Do not push the brake pedal while the
u
wheel is removed.
Tyre Puncture
Installation
To install the rear wheel, reverse the
1.
removal procedure.
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
Removing Wheels
u
Continued 97