Seat - Honda CB500XA 2017 Owner's Manual

Removing & Installing Body Components

Seat

Ignition key
Tab Recess
Seat lock
Front stay
60
u
Front prong
Rear
prongs
Seat
Rear stays
Seat
# Removal
Insert the ignition key into the seat lock.
1.
Turn the key clockwise, then pull the seat
2.
back and up.
#
Installation
Insert the front and rear prongs into the
1.
front and rear stays on the frame and the
recess into the tab.
Push forward and down on the rear of the
2.
seat until it locks in place.
Make sure that the seat is locked securely
in position to pull it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the seat.