KTM 690 Enduro EU 2010 Setup Instructions page 7

SET‑UP
–
Insert the rubber sleeves
–
Position the engine guard. Mount and tighten screws
Guideline
Remaining screws, chassis
Operation as 2-seater
–
Fit the rear footrest bracket. (
Operation as 1-seater (at customer request only)
(690 Enduro R)
–
B00250-10 Mount the rubber strap for the side stand. (
Warning
Forfeiture of homologation and insurance cover The vehicle is
homologated as 2-seater. If the heel protector is fitted instead of the
footrest bracket, the vehicle no longer conforms to the homologation and
must not be operated in this form without alterations to the registration
papers.
–
–
Fit the heel protector. (
–
Refuel. (
–
Print out the current PDI form found on KTM DEALER.NET and perform the delivery
inspection.
–
Set kilometers or miles. (
in the footrest bracket.

p. 9)
Set up and operate the vehicle as a 2-seater or have changes made
to the registration papers.
p. 10)
p. 10)
p. 11)
.

M6 10 Nm (7.4 lbf ft)
p. 9)
5