Table of Contents
Advertisement
OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
POWER ON :
Move the Pedals or press the button.
POWER OFF :
Automatically shuts off after four minutes of
inactivity.
FUNCTION BUTTON:
Press to select display functions, including SCAN, TIME,
COUNT, CALORIES, and TOTAL COUNT.
Press and hold for two seconds to reset all functions to zero.
FUNCTIONS:
SCAN:
Automatically scans each function of TIME, COUNT, CALORIES, and TOTAL COUNT
in sequence with change every six seconds. Press and release the button until
"SCAN" appears on the display.
TIME:
Displays the time from one second up to 99:59 minutes.
COUNT :
Displays the total crank revolutions you have completed during the current workout
from zero to 9999 revolutions.
TOTAL COUNT :
Displays the total accumulated crank revolutions you have taken from zero to 9999
revolutions. The total accumulated crank revolutions is retained when the meter is
turned off.
CALORIES:
Displays the calories burned from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
NOTE:
1. The meter will shut off automatically after four minutes of inactivity. All function
2. The TOTAL COUNT will be reset to zero after battery is removed for battery
HOW TO INSTALL AND REPLACE BATTERIES:
1. By hand or by using a simple tool remove the METER(31) from the
METER HOUSING(23).
2. The METER(31) operates with a AAA battery (1.5V each), the
battery is not included. Refer to the illustration to install or replace
the battery.
NOTE:
1. Rechargeable batteries are not recommended.
2. Ultimate disposal of battery should be handled
according to all state and federal laws and regulations.
3. Do not dispose of batteries in fire.
values will be kept. Press the button and hold it down for two seconds to reset all
functions to zero, except TOTAL COUNT.
replacement or storage of the unit.
10
SCAN TIME COUNT
CAL TOTAL COUNT
AAA Battery
Advertisement
Table of Contents
