Air Valve Repair - Graco TRITON D Series Instructions-Parts List Manual

Air Valve Repair

Tools Required
D 3 mm allen wrench
D Needlenose pliers
D Retaining ring removal tool
D O-ring pick
Disassembly
NOTE: Air Valve Repair Kit 245066 is available. Parts
included in the kit are marked with a dagger, for exam-
ple (8{). Use all the parts in the kit for the best results.
1. Remove the side cover (31) and felt dampener
(29).
2. Remove the four screws (36), air valve cover (17),
and gasket (16). See Fig. 7.
3. See Fig. 6. Note the orientation of the air valve
plate (13) relative to the fluid outlet arrow, with
"POM" marking up. Pull the plate out of the center
housing (1). Remove the three o-rings (14, 15) and
the two o–rings (43) from the plate. See Fig. 7.
4. Remove the air valve cup (12) from the center
housing (1).
18 309303
Service
5. Remove the retaining rings (11) and plug (9) from
both sides, and slide the carriage (7) from the
center housing (1). Remove the o-rings (8, 10)
from the carriage and the plug.
6. Clean all parts and inspect for wear or damage.
Replace parts as needed.
fluid outlet
arrow
Fig. 6
Orient "POM" marking on air
1
valve plate as shown in
relation to fluid outlet arrow.
1
1
13{
"POM"
marking
ti15226a