Paclan Cabling & Hardware Connections - J53 - Pacific Scientific OC950 Installation & Hardware Reference Manual

3.5 PacLAN Cabling & Hardware Connections - J53
PacLAN
connections
93 Ω
TERMINATOR
OC950
J51
J52
BNC TEE
J53
RG62U
COAXIAL
CABLE
3 - 24
Note: PacLAN is only available on the following models:
•
OC950-503-01, OC950-603-01
•
OC950-504-01, OC950-604-01
The electrical connections of the PacLAN interface between
SC950 servocontrollers is illustrated in the diagram below.
OC950 OC950
J51
J51
J52
J52
J53
J53
Cabling for the PacLAN interface must conform to RG62 cabling
specifications.
The most distant trunks of the cable should each be terminated in
93 ohm, 1/2 watt termination resistors. RG62 cable and 93 ohm
terminators are available from Black Box Corporation and South
Hills DataComm.
Note: PacLAN operation will be supported only if the proper
communications cabling is used.
93 Ω
TERMINATOR
OC950
OC950
J51
J51
J52
J52
J53 J53
MA950
OC950
J51
J52
J53