2.2 Installing 950IDE
Procedure
To install 950IDE, perform the following:
1. Insert the 950IDE diskette in your disk drive (A: or B:).
2. Windows will then ask you which drive (default is C) and
3. Windows will then ask you to select a Program Manager
Note: When finished, the 950IDE disk should be removed from
the drive and stored in a safe place.
2.3 Starting 950IDE
Procedure
To begin using 950IDE, perform the following:
1. If not already open, open the Pacific Scientific Group in
2 - 4
Start Windows and choose Run from the File Menu of
Program Manager. At the Command Line, type
A:\ setup950 (or B:\ setup950) and press the
enter key (↵ ) or click on OK.
directory (default is \950Win) you want 950IDE installed in.
Group (default is Pacific Scientific) that you would like the
icons placed in.
Program Manager. Double click on the 950 icon.
MA950