Compiling A Program; Run Program - Pacific Scientific OC950 Installation & Hardware Reference Manual

2.7 Compiling a Program

The SC950 requires a compiled program to be downloaded via
serial communications. To compile a program:
Procedure
1. Select Compile from the Compile menu, press
2. Make necessary corrections until program is compiled

2.8 Run Program

To run the current program:
Procedure
1. Select Run from the Compile Menu, press <F5> or click on
MA950
<Ctrl - F5> or click on the Run icon.
Any error detected during compilation will abort further
compilation (after the error is encountered), display the
compilation status, and return to the program highlighting the
program line containing the error.
successfully, and the Compiler Status indicates zero errors.
the Compile icon.
2 - 11