Table of Contents
Advertisement
2.5 Configuring Your System
Applying AC
Carefully check all wiring connections and ensure that J4-6 is not
Power
connected to J4-5. Apply AC power to your controller. The
drive status display LED should be alternately flashing U C (for
unconfigured) after the power up message.
Serial Port
To specify the PC serial port that is connected to the OC950:
1. Select Communications from the Options Menu and the
2. Specify the serial port that you want to use.
3. Specify the baud rate that you want to use and click on OK.
4. Select Variables from the Compile Menu. Type BaudRate
5. If the current value is incorrect, <Tab> to the New Value box
2 - 6
following dialogue box will appear:
in the Variable/expression box and press ↵.
and enter the desired baud rate.
MA950
Advertisement
Table of Contents
