Optical-drive bezel
Removing the optical-drive bezel
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
3. Remove the
front
cover.
4. Remove the
optical
drive.
About this task
NOTE:
Depending on the configuration ordered, your computer may not have an optical drive installed.
The following image(s) indicate the location of the optical-drive bezel and provides a visual representation of the removal
procedure.
Steps
1. Insert an unfolded paperclip into the emergency eject pinhole of the optical drive to open the drive tray.
2. Using a plastic scribe press down the tab that secures the optical-drive bezel to the optical drive.
Before working inside your
cover.
computer.
Removing and installing components
19