Installing the left-side cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the left-side cover and provides a visual representation of the installation
procedure.
Steps
1. Holding the left-side cover firmly on both sides, slide it into the chassis towards the front of the computer.
2. Replace the two screws (6-32) that secure the left-side cover to the chassis.
Next steps
1. Follow the procedure in
Front cover
Removing the front cover
Prerequisites
1. Follow the procedure in
14
Removing and installing components
After working inside your
Before working inside your
computer.
computer.