Table of Contents
Advertisement
Installing the memory
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
NOTE:
Up to two memory modules may be installed into this computer.
The following image(s) indicate the location of the memory and provides a visual representation of the installation procedure.
Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Insert the memory module into the memory-module slot.
3. Press down on the memory module until the memory module snaps into position and the securing clip locks in place.
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components on the memory module.
NOTE:
The securing clips return to the locked position. If you do not hear the click, remove the memory module and
reinstall it.
NOTE:
If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from
the slot.
4. Place the computer in an upright position.
Next steps
1. Install the
left-side
cover.
2. Follow the procedure in
28
Removing and installing components
After working inside your
computer.
Advertisement
Table of Contents
