Table of Contents
Advertisement
About this task
The following image(s) indicate the location of the graphics card and provides a visual representation of the installation
procedure.
Steps
1. Align the graphics card with the PCIe x16 slot on the system board.
2. Place the card into the slot and press down firmly until the graphics card snaps into place.
3. Connect the graphics-card power cable to the graphics card.
4. Rotate the card retention bracket towards the chassis until it snaps into place.
5. Place the computer in an upright position.
Next steps
1. Install the
left-side
cover.
26
Removing and installing components
Advertisement
Table of Contents
