Save Function Setting - Fisher FSL-850B-H-3F Installation And Operation Manual

Note:
1. Turbo function will be turned off after power failure and then recovery. In dry, fan and auto
mode, turbo function can not be set and turbo mark won't be displayed.
2. Turbo function will be automatically canceled after setting of quiet function.

5.10 Save Function Setting

Energy Saving Function: Energy saving result that the air conditioner runs in smaller temperature
range is realized by setting lower limited value of setting temperature in cooing or dry mode and upper
limited value in heating mode.
Energy Saving Setting for Cooling
Under on state and in cooling or dry mode of the unit, press Function button into energy saving
function , SAVE blinking .Press ▲ or ▼ button to adjust lower limited value of setting temperature in
cooing mode. After that press Enter/Cancel button to turn on energy saving function for cooling.
Energy Saving Setting for Heating
Under on state and in heating mode of the unit, press Function button into energy saving function,
SAVE blinking. Press Mode button into energy saving function for heating and then press▲ or ▼
button to adjust upper limited value of setting temperature in heating mode. After that, press Enter/
Cancel button to turn on energy saving function for heating.
After energy saving function is turned on, press Function button into energy saving function and
press Enter/cancel to cancel this function.
The energy saving setting is shown in the fig.5.10.
Fig.5.9 Turbo Function Setting
12