To Install The Outdoor Unit; To Provide Drainage; To Prevent The Outdoor Unit From Falling Over; Connecting The Refrigerant Piping - Daikin RXF50B2V1B Installation Manual

(mm)
a Maximum snowfall height
4.1.2

To install the outdoor unit

4.1.3

To provide drainage

NOTICE
If the unit is installed in a cold climate, take adequate
measures so that the evacuated condensate CANNOT
freeze.
INFORMATION
For information on the available options, contact your
dealer.
NOTICE
Provide at least 300 mm of free space below the unit.
Additionally, make sure the unit is positioned at least
100 mm above the expected level of snow.
1 Use a drain plug for drainage.
2 Use a Ø16 mm hose (field supply).
RXF50~71(A)(B)2V1B + RXP50~71L2V1B
R32 split series
3P512025-4C – 2018.01
4× M8/M10
a Drain port
b Bottom frame
c Drain plug
d Hose (field supply)
Make sure that condensation water can be evacuated properly.
To close the drain holes and attach the drain
socket
NOTICE
In cold areas, do NOT use a drain socket, hose and caps
(1, 2) with the outdoor unit. Take adequate measures so
that the evacuated condensate CANNOT freeze.
1 Install drain caps 1 and 2 (accessory). Make sure the edges of
the drain caps close off the holes completely.
a b
a Bottom frame
b Drain cap
2 Install the drain socket.
a b c b b
a
a
a Drain hole. Install a drain cap (2).
b Drain hole. Install a drain cap (1).
c Drain hole for drain socket
4.1.4 To prevent the outdoor unit from falling
over
In case the unit is installed in places where strong wind can tilt the
unit, take following measure:
1 Prepare 2 cables as indicated in the following illustration (field
supply).
2 Place the 2 cables over the outdoor unit.
3 Insert a rubber sheet between the cables and the outdoor unit
to prevent the cables from scratching the paint (field supply).
4 Attach the cables' ends and tighten them.
4.2

Connecting the refrigerant piping

DANGER: RISK OF BURNING
4 Installation
b
a
c
d
Installation manual
7