F7 Power Saving Mode - SMC Networks ISE30A Series Operation Manual

■[F 7] Power saving mode
Power saving mode is selectable.
When the Pressure switch is left for 30 seconds with no key operation, it will enter power saving mode.
<Operation>
Press the or
Setting of power saving mode
or
Press the
mode.
In power saving mode, any key operation will return the normal display. If there is no key operation for 30
seconds, the display will return to power saving mode (only in measurement mode).
In power saving mode, only the decimal points and
indicator LEDs will flash (the LEDs flash only when
the switch is ON).
∗: The indicator LEDs will flash when the switch is ON, but it is not synchronized with the output.
button in function selection mode to display [F 7].
Press the button.
button to select power saving
Press the button to set.
Setting of [F 7] Power saving mode completed
Move on to setting of power saving mode.
Return to function selection mode.
-35-
No.PS※※-OML0003-J