Table of Contents
Advertisement
2. Remove the front bezel. See "Front bezel" on page 49.
3. Remove the optical drive, if any. See "Optical drive" on page 50.
4. Remove the hard disk drive, if any. See "Hard disk drive" on page 51.
Removal steps
Remove the M.2 solid-state drive depending on the computer model:
• Type 1
• Type 2
Note: Remove the film that covers the thermal pad (if any) when installing the M.2 solid-state drive.
Coin-cell battery
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
58
neo 50s Gen 3 Hardware Maintenance Manual
Advertisement
Table of Contents
