Table of Contents
Advertisement
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged.
• Do not apply pressure to the internal storage drive.
• Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
For access, do the following:
1. Remove the computer cover. See "Computer cover" on page 48..
2. Remove the front bezel. See "Front bezel" on page 49.
3. Remove the optical drive, if any. See "Optical drive" on page 50.
4. Disconnect the signal cable and the power cable from the hard disk drive.
Replacement procedure of the 2.5-inch hard disk drive and bracket
52
neo 50s Gen 3 Hardware Maintenance Manual
Advertisement
Table of Contents
