Table of Contents
Advertisement
19. Remove motor screws from underside of the motor
and save for blade arm attachment. Discard the
plastic motor blocks but keep the motor screws
(Fig. 19).
Motor Screw
20. The blades attach to blade arms using the Fast
TM
Attach
system. Align each twist lock connector in
the direction of its corresponding hole in the blade.
Place the blade over the twist lock connectors.
Rotate each twist lock connector so that it is
perpendicular to the hole in the blade. Repeat for
the remaining blades (Fig. 20).
Note: A cutout in the upper switch housing allows easy
access to the motor screw holes.
21. Insert two previously removed motor screws
through one blade arm and blade isolator and
into the motor. Tighten motor screws securely.
Repeat with remaining blade arms, making sure
to completely secure each blade arm before
proceeding with to the next (Fig. 21).w
Motor Screw
BLADE INSTALLATION
Motor Block
Fig. 19
Fig. 19
Fig. 20
Fig. 21
Blade Isolator
Motor Screw
13
Motor Block
Motor Screw
Blade Arm
Twist Lock
Connector
Blade
Cutout
Blade Arm
Advertisement
Table of Contents
