STANDARD OR ANGLE MOUNTING INSTRUCTIONS
6. Partially loosen the motor housing set screws in the
yoke at the top of the motor housing (Fig. 6).
7. Remove the downrod pin and downrod clip from
the downrod (Fig. 7).
Downrod Pin
Downrod Clip
8. Thread the wires from the motor assembly through
the yoke cover, canopy, and out the top of the
downrod (Fig. 8).
Fig. 6
Fig. 7
Fig. 8
7
Set Screw
Downrod
Clip
Downrod
Pin
Downrod
Canopy
Yoke
Cover
Motor
Assembly