Canopy Installation; Blade Installation - Honeywell SALERMO Manual

19. Lift the canopy up so the partially installed mounting
bracket screws engage the J-slots on each side of
the canopy. Rotate the canopy clockwise and install
the previously removed mounting bracket screws
from Step 5. Tighten all four screws with a Phillips
screwdriver (Fig. 19).
Mounting Bracket
Screw
20. Insert the blade through the slot in the side of the
motor assembly. Align the holes in one blade with
three blade screw holes in the underside of the
motor assembly. Secure with three blade screws
and washers. Repeat for the remaining blades
(Fig. 20).
Blade Screw
Blade Washer

CANOPY INSTALLATION

BLADE INSTALLATION

12
Fig. 19
Mounting
Bracket Screw
Canopy
Fig. 20
Slot
Blade Washer
Blade Screw
Blade Screw
Holes
Mounting
Bracket
Blade
Underside
of Motor