Table of Contents
Advertisement
Item
E
F
G
H
Table 3. Components on the Control Panel (cont.)
Interface buttons
Hold/Run
Push h, the Product freezes the reading on the screen and the
screen will not refresh until you push h again.
Although the screen is frozen, the Product continues to measure.
Save/Logger
•
Short push: Save the current data or settings of the Analyzer.
•
Push and hold for 2 seconds: Enter the logger mode to
continuously log the measurements of the current screen (for
Meter mode only).
See
Data Management
Meter
Enter Meter Mode. See
Scope
Enter Scope Mode. See
Trend
Enter Trends Mode. See
Phasor
Enter Phasor Mode. See
Harmonic
Enter Harmonics Measurement Mode. See
Backlight / Prt Scr (Print Screen)
•
Short push: adjust the brightness of the backlight, which can be
adjusted in multiple levels.
•
Push and hold for 2 seconds: capture the current screen and
save it as a PNG format.
Memory operation
Manage data stored in internal memory. See
System setting buttons
Instrument information, instrument settings, communication settings.
See
System Settings
Description
for details.
Meter
for details.
Scope
for details.
Trend
for details.
Phasor
for details.
for details.
Power Analyzers
The Product
Harmonic
for details.
Memory
for details.
11
Advertisement
Table of Contents
