Removing & Installing Body Components
Battery
Battery holder
Bolt
Positive terminal
❙
Removal
Make sure the ignition switch is off.
1. Remove the left inner panel.
2. Remove the battery holder by removing
the bolt.
96
u
Battery
Negative terminal
Battery
P. 88
2
3. Disconnect the negative
the battery.
4. Disconnect the positive
the battery.
5. Remove the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
Readjust the clock after the battery is
reconnected since the clock goes wrong
once the battery disconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
Battery Goes Dead
2
terminal from
-
terminal from
+
+
P. 77
2
P. 140