Honda Deluxe 2014 Manual page 130

Tire Puncture u
8. Install the right brake caliper and tighten
new mounting bolts.
Torque: 23 lbf·ft (31 N·m, 3.2 kgf·m)
9. Install the left brake caliper and tighten
new mounting bolts.
Torque: 23 lbf·ft (31 N·m, 3.2 kgf·m)
u Take care to prevent the brake caliper
from scratching the wheel during
installation.
u Use new mounting bolts when
installing the brake calipers.
NOTICE
When installing the brake calipers into position on
the fork legs, carefully fit the brake disc between the
pads to avoid scratching them.
10. Lower the front wheel on the ground.
11. Apply the brake lever and brake pedal
several times.
128
Removing Wheels
12. Apply the brake lever and pump the fork
several times.
13. Retighten the left axle pinch bolts.
Torque: 20 lbf·ft (27 N·m, 2.8 kgf·m)
14. Raise the front wheel off the ground
again, and check that the wheel rotates
freely after you release the brake.
15. Remove the protective tape or cloth.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.