Honda Deluxe 2014 Manual page 133

Installation
Before installing the rear wheel, check that
the wheel hub and final drive gear splines are
coated with molybdenum disulfide paste.
Recommended molybdenum disulfide
paste:
(USA only) Pro Honda Moly 60 paste or
equivalent
1. To install the rear wheel, reverse the
removal procedure.
u
u
u
NOTICE
When installing the brake caliper into position,
carefully fit the brake disc between the pads to avoid
scratching them.
Splines
Tire Puncture u Removing Wheels
Take care to prevent the brake caliper
from scratching the wheel during
installation.
Be sure the splines on the wheel hub
fit into the final drive gear case.
Use a new stopper bolt when
installing the brake caliper.
continued 131