Honda Deluxe 2014 Manual page 51

Bluetoothr Audio Device
❙
To pair a Bluetoothr audio device
!a Select the audio mode 1 or 3 using the
(P48)
MODE button.
u The beep signal cannot be heard when
the mode 2 or 4 is chosen.
!b Press and hold the
(down) buttons. The Bluetoothr device
6
status icon (Bluetoothr mark and left arrow)
starts blinking and the short beep begins to
sound. The motorcycle is in pairing mode.
!c Select "Honda Motorcycle Audio" on an
audio device according to its manual.
Registration is completed when the icon
stops blinking and a long beep (1 second) is
heard.
u If an audio device cannot be registered,
there will be three short beeps and the
display returns to the ordinary display.
MODE and VOLUME
To end the pairing mode process, press and
hold the and
MODE
buttons.
After pairing, when the audio mode 1 or 2 is
selected with the registered audio device in
connectable state, the audio device will
connect automatically.
Presence of a Bluetoothr device in the
vicinity sometimes affects the pairing.
Some Bluetoothr audio devices may not be
compatible.
In the following cases, registration will be
canceled.
• If another audio device is registered.
• The audio system is reset.
Bluetoothr device
status icon
(down)
VOLUME
6
(P52)
continued 49