Table of Contents
Advertisement
8. Check that the power-supply cover fasteners (screws or rivets) have not been removed or tampered
with.
Handling electrostatic discharge-sensitive devices
Pseudo topic: DITA topic "file:/C:/Users/lexie.guo/OneDrive%20-%20Lionbridge%20Technologies,%20Inc/
+Projects/EX_ThinkCentre%20neo50t/3_HMM/Source/ThinkCentre%20neo50t_20211022_Ann/ThinkCentre
%20neo50t_20211022/Consumer%20DT%20HMM%20template/Handling%20electrostatic%20discharge-
sensitive%20devices%20(topic)_T0000699564.xml" could not be parsed.
Grounding requirements
Electrical grounding of the computer is required for operator safety and correct system function. Proper
grounding of the electrical outlet can be verified by a certified electrician.
Safety notices (multi-lingual translations)
The caution and danger safety notices in this section are provided in the following languages:
• English
• Arabic
• Brazilian/Portuguese
• Chinese (simplified)
• Chinese (traditional)
• French
• German
• Hebrew
• Italian
• Korean
• Spanish
DANGER
Electrical current from power, telephone and communication cables is hazardous.
To avoid a shock hazard:
• Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration
of this product during an electrical storm.
• Connect all power cords to a properly wired and grounded electrical outlet.
• Connect to properly wired outlets any equipment that will be attached to this product.
• When possible, use one hand only to connect or disconnect signal cables.
• Never turn on any equipment when there is evidence of fire, water, or structural damage.
4
ThinkCentre neo 50t Gen 3 Hardware Maintenance Manual
Advertisement
Table of Contents
