System Board; Removing And Installing Hardware - Lenovo ThinkCentre neo 50t Gen 3 Hardware Maintenance Manual

System board

1
8-pin power connector
3
Memory slot (DIMM1)
5
Buzzer
7
Internal speaker connector
9
Auxiliary fan connector
11
Clear CMOS/Recovery jumper
13
M.2 solid-state drive slot
15
Coin-cell battery
17
Front USB connector
19
Serial connectors*
21
PCI Express x16 graphics card slot
23
Cover presence switch connector

Removing and installing hardware

This section provides instructions on how to remove and install hardware for your computer. You can expand
the capabilities of your computer and maintain your computer by removing or installing hardware.
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Important safety information" on page 1.
2
Microprocessor fan connector
4
Memory slot (DIMM2)
6
Power button connector
8
10-pin power connector
10
SATA power connectors
12
SATA 3.0 connectors
14
M.2 Wi-Fi card slot
16
Thermal sensor connector
18
Parallel connector
20
PCI Express x1 card slots
22
System fan connector
24
Microprocessor socket
.
Chapter 5 Hardware removal and installation
43