Calibrating The Treadmill Distance; Recording A Strength Training Activity - Garmin FENIX 6S PRO Owner's Manual

Calibrating the Treadmill Distance

To record more accurate distances for your treadmill runs, you can calibrate the treadmill distance after you run
at least 1.5 km (1 mi.) on a treadmill. If you use different treadmills, you can manually calibrate the treadmill
distance on each treadmill or after each run.
1 Start a treadmill activity
2 Run on the treadmill until your watch records at least 1.5 km (1 mi.).
3 After you finish the activity, press
4 Select an option:
• To calibrate the treadmill distance the first time, select Save.
The device prompts you to complete the treadmill calibration.
• To manually calibrate the treadmill distance after the first-time calibration, select Calibrate & Save > Yes.
5 Check the treadmill display for the distance traveled, and enter the distance on your watch.

Recording a Strength Training Activity

You can record sets during a strength training activity. A set is multiple repetitions (reps) of a single move.
1 From the watch face, press
2 Select Strength.
3 Select a workout.
4 Press DOWN to view a list of workout steps (optional).
TIP: While viewing workout steps, you can press
selected exercise, if available.
5 When you have finished viewing the workout steps, press
6 Press , and select Start Workout.
7 Start your first set.
The watch counts your reps. Your rep count appears when you complete at least four reps.
TIP: The watch can only count reps of a single move for each set. When you want to change moves, you
should finish the set and start a new one.
8 Press LAP to finish the set and move to the next exercise, if available.
The watch displays the total reps for the set.
9 If necessary, press UP or DOWN to edit the number of reps.
TIP: You can also add the weight used for the set.
10 If necessary, press LAP when you are done resting to start your next set.
11 Repeat for each strength training set until your activity is complete.
12 After your last set, press
13 Select Save.
Activities and Apps
(Starting an Activity, page 6).
to stop the activity timer.
.
, and select Stop Workout.
and then press DOWN to view an animation of the
, and select Do Workout.
9