Mounting Procedure - Omron F3SJ-E N25 Series User Manual

Wiring/Installation


Mounting Procedure

 Using Top/Bottom Bracket only
1.
Attach Top/Bottom Brackets and tighten them using the included hexagon socket head cap screws (M3
x 6). Tighten the hexagon socket head cap screws (M3 x 6) with the torque at 0.54 N•m
(recommended). (Figure 1)
Loosen the hexagon socket head cap screws (M3 x 6), prepare brackets for backside or side
mountings, and then lightly tighten them with the hexagon socket head cap screws (M3 x 6).
Anti-rotation hexagon
socket head cap screw
(M3 x 8)
2.
Adjust the Top/Bottom Brackets to the mounting position of the wall surface and then tighten them with
screws. (Figure 2)
Screws to mount the brackets to the wall are not included.
F3SJ-E/B
72
User's Manual
Hexagon socket head
cap screws (M3 x 6)
Tighten
securely
Backside mounting
Loosen
Tighten lightly
Tighten
securely
Backside mounting
Top/Bottom
Mounting Bracket
Side mounting
Loosen
Tighten lightly
Figure 1
Tighten
securely
Side mounting
Figure 2
Anti-rotation hexagon
socket head cap screw
(M3 x 8)