Basic Configuration And Names - Omron F3SJ-E N25 Series User Manual

Overview and Specifications

Basic Configuration and Names

This section describes the system configuration and part names of the F3SJ-E/B. (The picture below is a F3SJ-B)
Component
Emitter, receiver
Emitter, receiver
To distinguish between the emitter and receiver, find the labels attached to the front of the F3SJ-E/B. The label on the emitter
reads "EMITTER" and the label on the receiver reads "RECEIVER".
F3SJ-E/B
2
User's Manual
Beam
Indicator
Emitter
Connection
cable (Gray)
Extension cable
Model
F3SJ-EN25-
F3SJ-BN25-
Beam center-line mark
Receiver
Connection cable
(Black)
Description
Select a type name based on the required protective height.
The model name can be understood as follows:
□□□□
F3SJ-E
1: Protective height (mm)
2: Output type (N for NPN output type *1)
3. Detection capability (mm)
4: L for emitter, D for receiver, blank for a set of emitter and receiver.
*1. A hyphen "-" is added instead of "N" for emitter.
Select a type name based on the required protective height.
The model name can be understood as follows:
□□□□
F3SJ-B
1: Protective height (mm)
2: Output type (N for NPN output type *1)
3. Detection capability (mm)
4: L for emitter, D for receiver, blank for a set of emitter and receiver.
*1. A hyphen "-" is added instead of "N" for emitter.
□
N25-
1 2 3 4
□
N25-
1 2 3 4