Using A Simple Wiring Connector For F3Sj-B - Omron F3SJ-E N25 Series User Manual



Using a simple wiring connector for F3SJ-B

•A combination of a cable for simple wiring (F39-JDBA) and a simple wiring connector (F39-CN5)
can be used for a simple wiring system.
F39-JD
Note1:When using the Simple Wiring Connector (F39-CN5), the following functions are not available.
• Manual Reset
• External Device Monitoring
• Auxiliary Output
• Muting/Override
Note2:F39-JDņB-L is connected to the emitter by the above picture, but even if F39-JDņB-L is
connected to the receiver, F3SJ operates.
F39-CN5
F39-JD A-D
B-L
+24V DC
S1
Power
*1
supply
0V
Safety
controllers,
etc.
Input/Output Circuit and Applications
S1 : External test switch (connect 24 V if a switch is
not required)
*1. Use a switch for small loads (input specifications:
24 V, 1.0 mA max.).
*2. When the lockout reset function is used, connect
to 0 V via a lockout reset switch (N.C. contact).
*3. Make sure the Communication lines are
insulated. If the lines are shorted, the F3SJ-B
enters the lockout state.
E
F3SJ-E/B
103
User's Manual