Table of Contents
Advertisement
Specifications
Water
WARNING!
Connect to potable water supply only.
§ Water Mineral Content:
– TDS: greater than 80 ppm (mg/l) but less than 400 ppm (mg/l)
– Hardness: Less than 200 mg/l (12 gpg)
§ Not recommended for use with softened water
Clearances
§ 3" (7 .62 cm) behind and on each side of dispenser for electrical and connection and ventilation
§ 4" (10 .2 cm) around chiller/carbonator
Electrical
§ 115V, 60 Hz, 1 phase, 6 .5A, maximum fuse 15A
§ Connect to dedicated 15A circuit, fuse or breaker
§ Must be grounded - requires 3-prong outlet . Do not remove ground .
Refrigeration
WARNING!
Do not damage the refrigerant circuit. Refrigerant can cause personal injury and/or damage dispenser.
Refrigerant R134a
§ Dispenser: 5 .0 ounces (142 grams)
§ Chiller/Carbonator: 1 .94 ounces (55 grams)
Heat Rejection
§ 1700 BTU/hr (498 W) - dispenser
§ 450 BTU/hr (132 W) - chiller/carbonator
Chiller/Carbonator Detailed Drawing
POWER
SWITCH
IEC
POWER CORD
CONNECTION
16.38"
(41.6 cm)
10.00"
(25.4 cm)
7.69"
(19.5 cm)
1.75" (4.4 cm)
ALL CARFBONATOR CONNECTIONS ARE 1/4" PUSH TO CONNECT
10.25"
(26 cm)
T-STAT
Sparkling Water and Ice Dispenser 7CI100A/7FS100A, 15CI100A/15FS100A
SPARKLING
4.50"
WATER OUT
(11.4 cm)
1/4" PUSH-
TO-CONNECT
2.19" (5.6 cm)
STILL
WATER OUT
1/4" PUSH-
TO-CONNECT
15.06"
(38.3 cm)
WATER
INLET
1/4" PUSH-
TO-CONNECT
CO2 GAS
1/4" PUSH-
TO-CONNECT
4.50"
(11.4 cm)
3.31"
(8.4 cm)
1.75" (4.4 cm)
7
Advertisement
Table of Contents
