Removing The M.2 2230 Pcie Solid-State Drive - Dell Precision 3660 Tower Service Manual

Steps
1. Align the notch on the solid-state drive with the tab on the solid-state drive connector.
2. Insert the solid-state drive at a 45-degree angle into the slot on the system board.
NOTE: When replacing a M.2 2230 solid-state drive with a M.2 2280 solid-state drive, ensure to move the standoff nut
to the M.2 2280 solid-state drive slot position.
3. Replace the screw (M2x3.5) to secure the M.2 2280 solid-state drive to the system board.
NOTE: Repeat the above procedure for installing the other solid-state drive.
Next steps
1. Install the side cover.
2. Follow the procedure in

Removing the M.2 2230 PCIe solid-state drive

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
24 Removing and installing components
after working inside your
before working inside your
computer.
computer.