Installing The 3.5-Inch Hard-Disk Drive Bracket - Dell Precision 3660 Tower Service Manual

Steps
1. Pry both sides of the hard-disk drive bracket edge to release the tabs on the bracket from the slots on the hard-disk drive.
2. Lift and remove the hard-disk drive off the hard-disk drive bracket.

Installing the 3.5-inch hard-disk drive bracket

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the 3.5-inch hard-disk drive bracket and provides a visual representation of the
installation procedure.
Removing and installing components 19