Removing The 3.5-Inch Hard-Disk Drive Assembly (Bay-2) - Dell Precision 3660 Tower Service Manual

Steps
1. Disconnect the data and power cables from the 3.5-inch hard-disk drive module.
2. Press the securing tabs to release the hard-disk drive assembly from the chassis.
3. Slide the hard-disk drive assembly away from the chassis.

Removing the 3.5-inch hard-disk drive assembly (Bay-2)

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following images indicate the location of the 3.5-inch hard-disk drive assembly and provide a visual representation of the
removal procedure.
before working inside your computer.
Removing and installing components 17