Solid-State Drive; Removing The M.2 2230 Pcie Solid-State Drive - Dell OptiPlex 3000 Small Form Factor Service Manual

Steps
1. Slide the optical drive into the disk-drive cage until it snaps into place.
2. Install the single (M2x3) screw to secure the optical drive to the disk-drive cage.
Next steps
1. Install the disk-drive cage.
2. Install the 3.5-inch hard-drive.
3. Install the 2.5-inch hard-drive.
4. Install the front bezel.
5. Install the side cover.
6. Follow the procedure in

Solid-state drive

Removing the M.2 2230 PCIe solid-state drive

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5-inch
5. Remove the 3.5-inch
6. Remove the hard-drive and optical-drive
About this task
The following images indicate the location of the M.2 2230 PCIe solid-state drive and provide a visual representation of the
removal procedure.
after working inside your
before working inside your
hard-drive.
hard-drive.
cage.
computer.
computer.
Removing and installing components 35