Module Bay; Installing A Device When Your Computer Is Turned Off - Dell OptiPlex GX745 User'smanual

Back to Contents Page
Dell™ OptiPlex™ 745 User's Guide
Module Bay
Module Bay
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
You can install a Dell™ portable device such as a floppy drive, optical drive, or second hard drive in the module bay.
Your Dell computer ships with either an optical drive or an airbay (filler blank) installed in the module bay. You can secure a device in the module bay by two
methods:
Locking switch (accessed by removing the computer cover)
l
Device screw (packaged separately)
l
See Securing a Device in the Module Bay
NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or
placing heavy objects on top of them.

Installing a Device When Your Computer Is Turned Off

To install a device in the module bay:
1. If the module bay contains an airbay instead of a device, pull the airbay out of the module bay and skip to
device screw.
1 bottom of computer
2 device screw
2. If the module bay contains a device that is locked, remove the cover (see
unlocked position by raising the locking switch. If a device screw is used, remove the screw.
for more information about securing a device in your computer.
step
Removing the Computer Cover) and move the module locking switch to the
5. If the airbay is locked, remove the